Aqua Lung Leg3nd MBS Satge 3 Set in DIN

Aqua Lung Leg3nd MBS Satge 3 Set in DIN
larger image

Aqua Lung Leg3nd MBS Satge 3 Set in DIN

This set comprises the amazing new Aqua Lung Leg3nd First Stage, the incredible Leg3nd MBS Second Stage and the new Leg3nd Octo in DIN.

 

LEG3ND is for the passionate, the explorers, the ones for whom diving is more than a sport. Aqua Lung, the original pioneer of the scuba regulator, brings you the most capable, coveted and advanced line of regulators ever created: This is the new LEG3ND, a masterpiece of engineering, built for all conditions, all depths and all dives. After all, the ocean is the ultimate proving ground - a place where respect is given and earned equally, where true Legends belong.

 

•    MBS controls venturi and inhalation 
•    ACD keeps contaminants out of first stage 
•    1st stage heat exchange surface 70% larger to reduce ice formation 

 

The LEG3ND MBS is a unique combined adjustment, it controls the inhalation effort and the venturi effect automatically.
The Master Breathing System is a new way to adjust the comfort on a second stage. The diver can perfectly master breathing comfort in one simple rotation. With the MBS on minimum position (only one full rotation): The spring is fully compressed and the inhalation effort is about 3 mbar higher. A free flow is contained when the venturi blade restricts the injection outlet. With the MBS on maximum position the injection of the airstream is unrestricted and the flow is maximized.

 

The first inhalation under water is the start of a new adventure. The revolutionary combination of Venturi effect and inhalation effort adjustment is natural and intuitive. Aqua Lung's Master Breathing System allows divers to control both in one simple rotation. All depths, all conditions, all dives - MBS will adapt.

 

First Stage

When the first stage is not connected to a cylinder valve, the Auto Closure Device (ACD) keeps the inlet shut to protect the first stage internal parts from contamination and corrosive water.
Preserves the internal lubrication
Keeps the inlet filter clean and dry
Safer for elevated percentages of oxygen
Exceptional cold-water performance is achieved by modernizing Aqua Lung's three anti-freeze properties:
Where there's no moisture, there's no ice: The LEG3ND's integrated dry chamber keeps inner components clean and dry by isolating them from the outside environment
Deep ribs create a large heat exchange surface area that helps to prevent ice forming on the mechanism (+30% vs Glacia / +70% vs Legend 2)
The new overmolded cap delays ice forming over the external diaphragm
Auto-Balanced (also known as Over-Balanced)
Progressive increase of the working pressure to maintain optimum breathing efforts: Depending on the diver's depth, the working pressure of the first stage is automatically elevated to counteract the increased breathing air density
Ergonomically shaped DIN and YOKE screws made of a bi-material “Soft Grip” surface provide a better hold when installing or removing the first stage – especially with cold hands
Channeled YOKE screw to prevent water retention.
Specialized ACD Dust cap attached to the regulator body to protect the inlet fitting and the ACD system from impacts or damage
Perfectly positioned HP and MP ports provide optimal hose routing.

 

Second Stage

New front cover opening channels allow water to flow sideways over the diaphragm
Radial openings to prevent freeflows when diving in stronger currents
Openings widened to reduce peak inspiratory flow by an impressive 20%
New overmolded exhaust cover made of elastomer with a “soft touch” effect
Overmolded air purge
Wide surface area makes regulator purging easier
Purge depth controller optimizes air flow with minimal effort
Patented Comfobite mouthpiece reduces jaw fatigue and secures the second stage more comfortably.
Detachable and reusable mouthpiece clamp allows a quick and simple tool-free mouthpiece change without plastic waste.
The enlarged heat exchanger helps to prevent freezing of the second stage mechanism
Air channel deflector
Directs the air flow evenly during the inhalation phase
Streamlined bi-material deflector lowers the exhalation effort
Flexible and lightweight Aqua Flex hose with dual protectors

 

Ocot Second Stage

New front cover opening channels allow water to flow sideways over the diaphragm
Radial openings to prevent freeflows when diving in stronger currents
Openings widened to reduce peak inspiratory flow by an impressive 20%
New overmolded exhaust cover made of elastomer with a “soft touch” effect
Overmolded air purge
Wide surface area makes regulator purging easier
Purge depth controller optimizes air flow with minimal effort
Patented Comfobite mouthpiece reduces jaw fatigue and secures the second stage more comfortably.
Detachable and reusable mouthpiece clamp allows a quick and simple tool-free mouthpiece change without plastic waste.
The enlarged heat exchanger helps to prevent freezing of the second stage mechanism
Air channel deflector
Directs the air flow evenly during the inhalation phase
Streamlined bi-material deflector lowers the exhalation effort
Flexible and lightweight Aqua Flex hose with dual protectors

  • Model: 7872
  • Shipping Weight: 2kgs
  • 1 Units in Stock
  • Manufactured by: Aqua Lung



£709.99

Add to Cart:

This product was added to our catalog on Saturday 12 October, 2019.

Your IP Address is: 3.227.235.183
Copyright © 2021 DIVE Northampton. Powered by DIVE Northampton